 |
|
|
Hi! Below are some ideas of pricing. Always remember that the most expensive part of the blackboard is the artwork and decorative headings. The cost is minimal to increase the size of your board or to add menu text. Menu text can be completed by brush or liquid chalk pen, the latter is the cheaper option. Supply Board = 6 mm think MDF board, 2 coats blackboard paint and 2 coats sealant on finished product. Prices for blank boards are at the bottom of this page. Please understand that this is a guide only, not an exact science. To see the transition from Layouts to the finished product, please take a look here!
The
prices below include GST but DO NOT INCLUDE POSTAGE OR FREIGHT Please note - I am NOT a commercial blackboard manufacturer or framer, but I will do my utmost to fulfil your blackboard requirements. I do NOT supply blank blackboards, nor do I know where you can buy them from . |
|
 |
|
Range
of small boards - subject to availability. I do not custom frame
boards at this stage. Framed boards between $40 - $80 up to 500
mm x 700 mm Blackboard
above – 400 mm x 600 mm frame board + Artwork and Signage
= Total Cost $250.00 - $290.00 |
|
 |
|
| Board
above - UNFRAMED Supply of board 600 mm x 900 mm ($30.00) + Artwork and Signage ($210.00) = $240.00 This
size is postable for around $20.00 (registured/insured) within Australia. |
|
 |
|
| Board
above Supply
of board 600 mm x 900 mm ($30.00) + Artwork and Signage ($280.00)
+ Hand brushed menu text ($70.00) - Chalk pen is cheaper = $380.00 |
|
 |
|
| Board
above Supply
board 1500 mm x 1000 mm ($70.00) + Artwork and Signage ($570.00)
+ Menu text ($140.00) = $780.00 |
|
 |
|
| And pure Artwork. The board above 600 mm x 900 mm (Artwork only, NO FRAME) = $700.00 | |
| I hope this has assisted you in making your decision. Please feel free to compare my prices with any other reputable Blackboard/Chalk Artist, or to contact me with any questions. | |
| 6 mm MDF, cutting if necessary, with 2 coats black paint & 2 coats final sealant. 900 mm x 600 mm - $30.00 1200 mm x 900 mm - $39.00 1830 mm x 915 mm - $66.00 2400 mm x 1215 mm - $71.00 - to be freighted in 2 pieces where possible If you have existing framed boards, to large or costly to freight to me, just send me the inside measurements and I can supply 3 mm thick boards, which can be screwed, taped or glued over the top of your existing board. These can be replaced as needed. |
|
*Important Information!
|
|