I like to work with 6 mm thick MDF board, which will suit most blackboard jobs. Boards smaller than those listed below, will be rounded up to the nearest available size. Where multiple boards can be cut from the same board, you will only be charged for one board. Prices are for board only, painted black & sealant on finished product (inc GST) - Artwork & signage is NOT included.

Please note - I am NOT a blackboard manufacturer or framer, but I will do my utmost to fulfil your blackboard requirements.

 

6 mm MDF

1200 mm x 900 mm - $27.50

1830 mm x 915 mm - $50.00

1000 mm x 600 mm - $22.00

2400 mm x 1215 mm - $55.00 - I suggest freighting in 2 pieces

Small framed boards are usually available approx. 500 mm x 400 mm and come in a variety of timber and metal frames - subject to availability.

If you have existing framed boards, to large or costly to freight to me, just send me the inside measurements and I can supply 3 mm thick boards, which can be screwed over the top of your existing board. These can be replaced as needed.

*Important Information!

  • 25% Deposit required before commencement & balance is required prior to delivery

  • Layouts will be provided prior to job commencement

  • Layouts consist of computer generated images and text. They are a representation ONLY. As you can appreciate, I do not like to spend too much time on the layouts, I would rather put the effort into your actual Blackboard. Please remember my blackboards are hand completed, minor changes can be made after commencement. Major changes will result in extra charges.

  • Approval in writing is required before job commencement by fax or email

  • Photos will be forwarded, prior to sealing, by email

  • Job turn around time - one to two weeks after approval and is subject to my work load

  • All boards are for indoor or weather/sun protected areas ONLY